New vs. Refurbished vs. Used Schramm Rigs: A Five-Year TCO Breakdown for Procurement Teams

Crushing and screening article workspace

The comparison, upfront: three options, one budget line

When you're sourcing a Schramm rotary rig, you're usually weighing three paths: buy new from the factory, buy factory-refurbished, or buy used through a dealer. Each one has a different sticker price. Each one also has a different five-year cost that the quote sheet doesn't show you.

I buy rigs for a living. I'm a procurement manager at a 180-person drilling contractor, I've managed our capital equipment budget — roughly $4.2M annually — for six years, and I've logged every rig order and every maintenance invoice in our cost tracking system since 2019. In Q2 2024, when we were evaluating a replacement for an aging T130, I pulled the actual five-year cost data on four rigs we'd bought between 2019 and 2022. What I found changed how I evaluate every quote now.

Here's the bottom line before we get into the weeds: on one rig, the gap between the lowest purchase quote and the lowest total cost of ownership was 31%. That's not a rounding error. That's a spare parts budget. So I'm going to walk through this the way I present it to our CFO — dimension by dimension, with the quotes on one side and the tracked costs on the other.

The dimensions I use, in order of how often they get ignored: upfront cost, five-year TCO, uptime and parts availability, and resale. I'll give you my read on each, and then tell you which scenario favors which option.

Dimension 1: Upfront cost — where the numbers look clear but usually aren't

On paper, this one is simple. Across the quotes we collected for comparable rotary configurations in 2024:

  • New Schramm rig: full factory spec, full warranty, factory commissioning included. Highest sticker, naturally.
  • Factory-refurbished: typically lands in the 60–72% range of new pricing, depending on hours and which components get replaced.
  • Used dealer inventory: the wide band — say 40–60% of new, and it can swing harder in either direction depending on condition and provenance.

Those ranges are ballpark figures from the quotes that crossed my desk last year, not from a published price list — Schramm configures rigs per application, so the factory quote depends heavily on what you actually need.

Here's where the clarity breaks down. When I audited our 2023 spending, I found that roughly 14% of what we paid on a used rig purchase came after the signed contract: freight we thought was included, commissioning labor, a tooling package that wasn't in the original spec, and operator orientation that turned out to be a paid add-on. None of it was hidden maliciously — it just wasn't in the quote. That's the classic rookie error, and I made it in my first year here. I assumed "delivered and commissioned" meant one number. It didn't.

The comparison conclusion: On sticker price, used wins. On actual cash out the door, the gap between used and refurbished narrows to single digits once you account for freight, commissioning, tooling, and training. Ask for a line-item "exclusions" list on every quote before you compare totals. If a vendor can't produce one in writing, that's a red flag, not a negotiation tactic.

Dimension 2: Five-year TCO — where the real difference lives

This is the dimension that separates a good deal from a cheap one. I'm not going to pretend the numbers are clean across every application — a water well rig and a geothermal rig don't age the same way — but the pattern in our tracked data was consistent enough to act on.

I pulled maintenance and parts spend for four rigs over the first 60 months of service. On the used unit, unplanned maintenance ran about 2.3x the refurbished unit and roughly 3x the new unit in years 3–5. Part of that is age. Part of it is provenance — we didn't know the full service history on the used rig, and it showed. The refurbished unit, bought directly through Schramm's program with documented component replacement, tracked within 18% of the new unit's maintenance curve.

It took me about four years and thirty-some rig quotes to understand this properly: the refurbished tier is not a discount tier. When the factory does the work and documents it, you're buying a known maintenance baseline. That's worth more than the 8–10% price gap between refurbished and a clean-sounding used unit.

One more line item that almost never makes it onto comparison sheets: downtime cost. We run a $2,800-per-day effective rate on an idle crew and lost contract hours. A rig down for a week waiting on a part is a $19,600 problem before the part invoice even arrives. That's not a theoretical number — that's what I put in front of our CFO in Q3 2024 when I argued for the refurbished unit over the cheaper used one. I won that argument on this line alone.

The comparison conclusion: Used wins year 1. Refurbished wins by year 3. New wins if the rig is a primary revenue unit running double shifts. If the rig is supplemental capacity, refurbished is almost always the sweet spot — but only if the refurbishment is documented by the factory or an authorized partner.

Dimension 3: Uptime and parts availability — the dimension nobody quotes

This is the counterintuitive one. Most buyers assume parts availability correlates with how new the machine is. It mostly does — but the driver isn't age. It's the support network behind the serial number.

On our tracked rigs, the average lead time for a critical part was 3.2 days on the Schramm-supported units (new and factory-refurbished) and 11.6 days on the used unit sourced through a third-party dealer. Same brand. Different support relationship. The used unit wasn't unreliable — it just wasn't plugged into a parts pipeline, and when a rotary head component failed, we were bidding on aftermarket inventory.

I knew I should have verified the parts channel before signing on that used rig. I thought "it's the same brand, parts are parts." Well, the odds caught up with us in month 9 when a down-hole component went and we spent two weeks chasing inventory across three dealers. That was the one time it mattered, and it cost us a client relationship I'd rather not lose again.

The comparison conclusion: On uptime, new and factory-refurbished are effectively tied — both sit inside the manufacturer's support network. The used tier depends entirely on the dealer. Ask one question before you buy: "If a critical component fails in month 6, who do I call, and what's the contractual lead time?" If the answer is vague, price the risk in.

Dimension 4: Resale value — the exit strategy

Nobody buys a rig planning to sell it. Everybody sells it eventually. This dimension took me the longest to appreciate, and it's the one where the brand's field reputation does the most work for you.

In our own disposal history — three rigs sold between 2021 and 2024 — the Schramm-badged units held residual value noticeably better than a mixed-brand unit we'd acquired through an auction. I'm not going to quote you a precise depreciation curve because I don't have enough sales to make that claim honestly. But directionally, the resale spread between a documented, dealer-supported rig and an orphaned one was wide enough to be a real line in the TCO spreadsheet, not a footnote.

The comparison conclusion: Resale doesn't flip the ranking — new is still the highest absolute cost and used is still the cheapest — but it narrows the lifetime gap. If you plan to cycle the rig out inside seven years, factor resale in. If you plan to run it into the ground, ignore this dimension entirely.

So which one should you actually buy?

No single answer — that's not how procurement works. Here's how I'd map it:

  • Buy new if the rig is a primary revenue unit, you're running it near-continuously, and the application spec is unusual enough that configuration flexibility matters more than price. The upfront premium buys you the cleanest TCO curve and the strongest support relationship.
  • Buy factory-refurbished if you need documented reliability at a discount and you're comfortable with a slightly shorter warranty window. In our tracked data, this was the best risk-adjusted option for supplemental and mid-duty capacity — provided the refurbishment documentation is real and the parts channel is intact.
  • Buy used if you have in-house mechanical depth, you can verify service history, and you're genuinely okay absorbing downtime risk. If any of those three isn't true, the 10% you save on the sticker is probably already spent.

The one thing I'd push back on is treating the lowest quote as the starting point. I've learned to ask "what's not included" before "what's the price." The vendor who lists every exclusion upfront — even when the total looks higher — usually costs less by the time the rig is three years old. That's not a moral position. It's just what the numbers in our tracking system keep showing.

Pricing references in this article are based on quotes received between 2023 and 2024 for North American rotary drilling configurations. Rig pricing, parts lead times, and refurbishment programs vary by region and application — verify current terms with the manufacturer or authorized dealer before budgeting.

LinkedIn Email Ask Alpine
A

Alpine Equipment Team

Practical notes from Alpine specialists focused on crushing, screening, wear planning, and uptime-oriented equipment decisions.

Previous: The 48-Hour Bauer Tool Order That Taught Me to Stop Saying 'We Have Stock' Next: Rexnord Procurement: Does Executive Compensation and Salary Data Matter for Your Supplier Strategy?